Keywords
active load
capacitive filter
inductive-capacitive converter
electromagnetic compatibility
How to Cite
Abstract
The electromagnetic processes in a single-phase bridge rectifier with an active load and a capacitive filter during its power supply from a symmetrical inductive-capacitive converter (ICC) made according to the M1 scheme were studied, and a comparison of its quality characteristics with the ICC according to the T1-LCL scheme was carried out. It was established that the M1 scheme has better specific power indicators, however, the use of the ICC bridge structure is impractical without improving its electromagnetic compatibility with the power supply network. Methods of perfecting such an ICC are proposed. Ref. 14, fig. 4, table.
References
Milyakh A.N., Volkov I.V. AC systems based on inductive-capacitive converters. Kyiv: Naukova dumka, 1974. 216 p. (Rus)
Saratovsky R.N. Constant current source for power supply of induction heating installations. Tekhnichna elek-trodynamika. 2009. No 4. Pp. 12–15. (Rus)
Korotynsky A.E., Makhlin N.M., Poloskov S.I. Use of inductive-capacitive converters in multi-station welding systems. Tiazheloe mashinostroenie. 2009. No 7. Pp. 31–34. (Rus)
Konesev S.G., Kirillov R.V., Khazieva R.T. Inductive-capacitive converters for high-voltage secondary power supplies. 2019 IEEE International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon), 2019. DOI: https://doi.org/10.1109/FarEastCon.2019.8934018
Dozorov S.A. Research and development of inductive-capacitive power sources: autoref. thesis Ph.D. technical Sciences: specialist 05.09.03 Electrotechnical complexes and systems. St. Petersburg, 2013. 18 p. (Rus)
Michael L. G. Kissin; Chang-Yu Huang; Grant A. Covic; John T. Boys. Detection of the tuned point of a fixed-frequency LCL resonant power supply. IEEE Transactions on Power Electronics, 2009. 24(4):1140–1143. DOI: https://doi.org/10.1109/TPEL.2008.2011641
Volkov I.V., Gubarevich V.N., Isakov V.N., Kaban V.P. Principles of construction and optimization of circuits of inductive-capacitive converters. Kyiv: Naukova dumka, 1981. 173 p. (Rus)
Spirin V.M., Gubarevich V.M., Marunia Yu.V., Salko S.V. Quality characteristics of single-phase bridge recti-fier with active load and capacitary filter for power from the current source. Tekhnichna elektrodynamika. 2020. No 2. Pp. 23–27. DOI: https://doi.org/10.15407/techned2020.02.023 (Ukr)
DSTU IEC 61000-3-2: 2016. Electromagnetic compatibility. Part 3-2. Norms. Current harmonic emission stan-dards (for equipment input current not more than 16 A per phase) (IEC 61000-3-2: 2014, IDT). (Ukr)
Pinchuk S.I. Organization of an experiment in modeling and optimization of technical systems. Dnepropetrovsk: Diva, 2008. 248 p. (Rus)
Reznikov S., Bocharov V., Konyakhin S., Gurenkov N. Modeling of inductive-capacitive converters (IEP) with rectifier-capacitive load. Silovaia elektronika. 2010. No 3. Pp. 48–53. (Rus)
Demirchan K.S., Neumann L.R., Korovkin N.V., Chechurin V.L. Theoretical foundations of electrical engineer-ing. Vol. 1. Sanct Peterburg: Izd-vo Piter, 2006. 464 p. (Rus)
Spirin V.M., Gubarevich V.M., Marunia Yu.V., Salko S.V., Grebenyuk V.G. Optimization of inductive-capacital converter with bridge one-phase rectifier, capacitary filter and parallel active load. Tekhnichna elektrodynamika. 2019. No 6. Pp. 25–29. DOI: https://doi.org/10.15407/techned2019.06.025 (Ukr)
Spirin V.M., Gubarevich V.M., Marunia Yu.V., Salko S.V., Grebenyuk V.G. Determination of the coefficient of the transformation of a current parameter bridge of a single-phase rectifier with parallel active-capacitive load. Tekhnichna elektrodynamika. 2019. No 5. Pp. 25–29. DOI: https://doi.org/10.15407/techned2019.05.043 (Ukr)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright (c) 2022 V.M. Gubarevich, Yu.V. Marunia, V.P. Kaban, V.Yu. Matveev