FEATURES OF RATE OF CURRENT RAISE IN THE LOAD OF SEMI-CONDUCTOR ELECTRO-DISCHARGE INSTALLATIONS
Article_11 PDF (Українська)

Keywords

transient
discharge current
capacitor capacitance
rate of current rise

How to Cite

Suprunovska, N.I., et al. “FEATURES OF RATE OF CURRENT RAISE IN THE LOAD OF SEMI-CONDUCTOR ELECTRO-DISCHARGE INSTALLATIONS”. Proceedings of the Institute of Electrodynamics of the National Academy of Sciences of Ukraine, no. 47, May 2017, p. 077, https://www.prc.ied.org.ua/index.php/proceedings/article/view/277.

Abstract

The features of the change in the average rate of current rise in the load during oscillatory and aperiodic discharge of a reservoir capacitor of electric discharge installations are studied. The regularities of the change in the average rate of discharge currents rise in the load at forced limitation of currents durations and a change in the capacitance of the discharge circuit are determined. It is proved that increasing the capacity of the capacitor reduces the duration of the rise of the discharge current from zero to any fixed value less than the maximum value of the current. Based on this, it is proposed the method for increasing the rate of rise of pulsed currents in the load, which is founded on increasing the capacity of the discharged capacitor and forced interrupting the current in the load when a specified fixed value (or duration) of the current is reached. References 17, figures 5, tables 3.

Article_11 PDF (Українська)

References

Asanov U.A., Tsoi A.D., Shcherba A.A., Kazekin V.I. Electroerosive technology of chemical compounds and metal powders. Frunze: Ilim, 1990. 255 p.

Vovchenko A.I., Tertilov R.V. Synthesis of capacitive non-linear-parametric energy sources for discharge-pulse technologies. Zb. Sciences. etc. Nat. un-that shipbuilding. 2010. No 4. P. 118-124.

Zakharchenko S.N., Kondratenko I.P., Perekos A.E., Zalutsky V.P., Kozyrsky V.V., Lopatko K.G. Influence of the duration of discharge pulses in a layer of iron granules on the dimensions and structural-phase state of its electroerosive particles. Eastern European Journal of Advanced Technologies. 2012. V. 6. No 5 (60). P. 66–72.

Kravchenko V.I., Petkov A.A. Parametric synthesis of a high-voltage pulse test device with a capacitive energy storage. Elektrotekhnika i Elektromekhanika. 2007. No 6. P. 70–75.

Krug K.A. Physical foundations of electrical engineering. M. L.: Gosenergoizdat, 1946. 472 p.

Shidlovsky A.K., Shcherba A.A., Suprunovskaya N.I. Energy processes in charge and discharge circuits of capacitors of electropulse installations. K.: Intercontinental-Ukraine, 2009. 208 p.

Shcherba A.A., Suprunovskaya N.I. Patterns of increasing the rate of rise of discharge currents in the load when their maximum values ​​are limited. Tekhnichna Elektrodynamika. 2012. No. 5. P. 3–9.

Shcherba A.A., Suprunovskaya N.I., Ivashchenko D.S. Simulation of the nonlinear resistance of an electric spark load for the synthesis of a capacitor discharge circuit by time characteristics. Tekhnichna Elektrodynamika. 2014. No 3. P. 12–18.

Shcherba A.A., Suprunovskaya N.I., Ivashchenko D.S. Modeling of the nonlinear resistance of an electric spark load, taking into account its change during the flow and absence of a discharge current in the load. Tekhnichna Elektrodynamika. 2014. No 5. P. 23–25.

Berkowitz A.E., Hansen M.F., Parker F.T., Vecсhio K.S., Spada F.E., Lavernia E.J., Rodriguez R. Amorphous soft magnetic particles produced by spark erosion. J. of Magnetism and Magnetic Materials. 2003. Vol. 254–255. P. 1–6.

Berkowitz A.E., Walter J.L. Sparc Erosion: A Method for Producing Rapidly Quenched Fine powders. J. of Mater. Res. March/April, 1987. No 2 (2). P. 277–288.

Cabanillas E.D., Lopez M., Pasqualini E.E., Cirilo Lombardo D.J. Production of uranium-molybdenum particles by spark-erosion. J. of Nuclear Materials. 2004. No 324. P. 1–5.

Casanueva R., Azcondo F.J, Branas C., Bracho S. Analysis, design and experimental results of a high-frequency power supply for spark erosion. IEEE Transactions on Power Electronics. 2005. Vol. 20. P. 361–369.

Mysinski W. Power supply unit for an electric discharge machine. 13th European Conference on Power Electronics and Applications, 2009. EPE '09. P. 1–7.

Nguyen P.K., Lee K.H., Moon J., Kim K.A., Ahn K.A., Chen L.H., Lee S.M., Chen R.K., Jin S. and Berkowitz A.E., Spark erosion: a high production rate method for producing Bi0.5Sb1.5Te3 nanoparticles with enhanced thermoelectric performance, Nanotechnology, 23 (2012). P. 1–7.

Sen B., Kiyawat N., Singh P.K., Mitra S., Ye J.H., Purkait P. Developments in electric power supply configurations for electrical-discharge-machining (EDM). The Fifth International Conference on Power Electronics and Drive Systems, 2003. PEDS 2003. Vol. 1. P. 659–664.

Suprunovska N.I., Shcherba A.A. Features of the Energy Interchange Between Capacitors in the Circuit Using Unidirectional Commutator or Bidirectional One. Proceedings of 2016 IEEE 2nd International Conference on Intelligent Energy and Power Systems (IEPS). 2016. P. 45–48.

Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

Copyright (c) 2017 N.I. Suprunovska, A.A. Shcherba, S.S. Roziskulov, Yu.V. Peretiatko

Downloads

Download data is not yet available.