Keywords
stator core
winding insulation
mounting options
numerical studies
thermomechanical parameters
How to Cite
Abstract
Based on the finite element method, a numerical method for calculating thermomechanical movements and stresses of the components of the stator winding of a powerful turbogenerator is proposed, taking into account its regime and structural factors. The results of studies of these characteristics in insulation along the length of the core in radial and axial directions in different variants of fixing the winding in the end zone of the core are presented. The regularities of distribution of maximum and average values of thermomechanical parameters in the groove and frontal parts with the traditional method of fastening and the presence of a free section of the core in the end zone of the stator in the nominal mode of operation of the generator are determined. Ref. 12, fig. 4.
References
Kensytskyi O.H. Operating reliability of generating equipment of power units of nuclear power plants of Ukraine. Pratsi Instytutu Elektrodynamiky Natsionalnoi Akademii Nauk Ukrainy. 2021. Vol. 58. Pp. 100–106. DOI: https://doi.org/10.15407/publishing2021.58.100 (Ukr)
Kuchynskyi K.A. Effect on circulation disorders distillate on thermomechanical stresses in isolation of the stator winding of the turbogenerator by power 800 MW. Tekhnichna Elektrodynamika. 2014. No 1. Pp. 75–80. (Rus)
Kuchynskyi K.A. The Analysis of Temperature Field of Rotor of Turbogenerator Capacity 300 MW at Asymmetry of Cooling of Grooving Zone. Tekhnichna Elektrodynamika. 2013. No 4. Pp. 59–66. (Rus)
Golodnova O.S. Principal causes of failures of turbogenerators and a way of their forestalling. Мoskva: IPK-gossluzhby, 2005. 92 p. (Rus)
Kramarsky V.А., Cheremisov І.Ya., Titko О.I., Gruboy O.P., Pensky V.F, Minko O.M. Stator of an electric machine. Patent UA No 99571, 2015. (Ukr)
Titko O.I, Kobzar K.O., Hvalin D.I. The stator core of AC electric machine. Patent UA No 111154, 2016. (Ukr)
Titko O.I., Myshasty N.D., Voronin A.I., Hvalin D.I. Experimental studies of the effectiveness of tooth-slot design screens of turbo generators stators. Pratsi Instytutu Elektrodynamiky Natsionalnoi Akademii Nauk Ukrainy. 2017. Vol. 46. Pp. 34−42. (Ukr) DOI: https://doi.org/10.15407/publishing2017.46.034
Kensytskyi O.G., Hvalin D.I. The end zone turbogenerator electromagnetic field for changes the reactive load. Tekhnichna Elektrodynamika. 2018. No 1. Pp. 62−68. (Ukr) DOI: https://doi.org/10.15407/techned2018.01.062
Avrukh V.Yu., Pikulskyi V.A., Chistikov A.A. Research of possibilities for reducing thermomechanical loadings of stators of turbogenerators. Elektricheskie stanzii. 1986. No 4. Pp. 42–44 (Rus)
Zozlin Yu.V., Antonov O.E., Bychik V.M., Borichevskii A.M., Kobzar K.O., Livshits O.L., Rakogon V.G., Rogovyi I.Kh., Khajmovich L.L., Cherednik V.I. Creation of new types and modernization of acting turbogenerators for thermal power plants. Kharkiv: PF «Kolegium», 2011. 228 p. (Ukr)
Golodnova O.S, Rostik G.V. Analysis and provisions under the forestalling of faults of cores of stators of turbogenerators. Elektrosila. 2004. No 43. Pp. 56−64. (Rus)
Glebov I.A., Danilevich Ya.B. Scientific of a basis of designing of turbogenerators. Leningrad: Nauka, 1986. 184 p. (Rus)
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright (c) 2022 K.A. Kuchynskyi