Keywords
configuration
technical characteristics
design
commercial unmanned aerial vehicle
How to Cite
Abstract
The article provides an overview of the design features, advantages, and disadvantages of motors used for commercial unmanned aerial vehicles. A review and analysis of multiphase classical SRMs is presented. A comparative analysis of the technical performance of an outer rotor SRM аnd PMSMs is presented, Based on a review of approaches to the design and effective methods of controlling the speed of switched reluctance motors of electromechanical systems with variable load, the main development trends and ways of further research into SRM for commercial unmanned aerial vehicles have been identified. Ref. 10, fig. 3.
References
1.Patel S. R, Gandh N., Chaithanya N., Chaudhari B. N., Nirgude A. Design and development of Switched Reluctance Motor for electric vehicle application. IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Trivandrum, India, 2016. Pp. 1–6. DOI: https://doi.org/10.1109/PEDES.2016.7914356
2.Shouyi Han, Kaikai Diao, Xiaodong Sun. Overview of multi-phase switched reluctance motor drives for electric vehicles. Advances in Mechanical Engineering. 2021. No 13(9). DOI: https://doi.org/10.1177/16878140211045195
3.Vigneshwar S.T., Balaji M., Prabhu S. Comparative Analysis of PMSMs and SRMs for Drone Applications. Engineering Proceedings. 2025. No 93(1). Pp. 4. DOI: https://doi.org/10.3390/engproc2025093014
4.Vigneshwar S.T., Balaji M., Kamaraj V., Prabhu S. Comparative Analysis of Switched Reluctance Motors with Different Slot Pole Combinations for Quadcopter Applications. ICSES. Chennai India, 2024. DOI: https://doi.org/10.1109/ICSES63760.2024.10910667
5.Balalaieva К., Balalaiev А., Golembiyevskyy G., Kovtun A. Characteristics of a quadcopter propeller. Aerospace Engineering and Technology. 2023. No 4 Special Issue 1 (189). Pp. 23–28. DOI: https://doi.org/10.32620/aktt.2023.4sup1.04 (Ukr)
6.Singh V.K., Sharma U. and Singh B. Design FEA and Dynamic Simulation Based Model of an Outer Rotor SRM for an Efficient Fan Application. IEEE International Conference on Power Electronics, Drives and Energy Systems (PEDES), Jaipur, India, 2020. Pp. 1–6. DOI: https://doi.org/10.1109/PEDES49360.2020.9379688
7.Tkachuk V.I., Bilyakovsky I.E., Malysh O.V. Methodology for designing of inverted switched reluctance motor. Visnyk Natsionalnoho universytetu Lvivska politekhnika. 2006. No 563. Pp. 136–140. (Ukr)
8.Tkachuk V. I., Bilyakovsky I. E., Prodius V. M., Vaida B. R. Features of thermal calculation of an electromechanical converter with a salient pole stator and an external passive rotor. Visnyk Natsionalnoho universytetu Lvivska politekhnika. 2007. No 587. Pp. 94–100 (Ukr)
9.Bibik O.V. The development of theory and measures of improve the energy efficiency of switched reluctance and induction motors with variable load. The thesis for a doctor of technical sciences degree in specialty 05.09.01 Electrical machines and apparatuses. Institute of Electrodynamics of NAS of Ukraine, Kyiv, 2020. 40 p. (Ukr)
10.Bibik O.V., Mazurenko L.I., Shykhnenko M.O. Effective Methods to Control the Switched Reluctance Drive of Pumping and Compressor Equipment and Electric Transport. IEEE 5th International Conference on Modern Electrical and Energy System (MEES), Kremenchuk Mykhailo Ostrohradskyi National University, Kremenchuk, 2023. Poster Session. DOI: https://doi.org/10.1109/MEES61502.2023.10402474
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
Copyright (c) 2025 O.V. Bibik